Tungsten Product
Tungsten contacts
In addition to the huge melting point, tungsten also has high electrical
and thermal conductivity. Conventional wires are not made of it only
because of the high cost of the product. But in specialized areas, it
has been successfully used to create transmitting bridges, contactors
and connectors. Tungsten contacts can have a different shape, depending
on the scope of its application. Its main feature is that with frequent
closing and opening of the circuit, its surface always remains clean
from oxides, which ensures uninterrupted operation of the system. Those
who want to buy tungsten contacts will find it useful to know that they
are usually sold as ready-made sets, individually, or in large batches
per kilogram.
Tungsten contact is possible due to the fact that on the basis of the
enterprise all products undergo a full production cycle, from production
at the field to molding and processing. This guarantees exceptional
quality. No scrap, no recycling or smelting. Only accurate chemical
composition and predictable physical properties.
Where is tungsten contact applied?
First of all, it is an element of an electric circuit that can operate
under heavy loads with overheating, not succumbing to reflow. This also
occurs due to the rapid cooling of the surface due to good
heat-conducting characteristics. It is mainly used for the manufacture
of the following products:
Switches and switches, including oil-filled explosion-proof
modifications.
Tips and other parts for creating electric arcs.
Switches of powerful appliances.
They can be used as small tires for heavy loads, as well as for creating
power relays.
All products from MetalKomplekt demonstrate full compliance with
technical specifications, compliance with domestic and foreign
standards.
.
Tungsten
Cobalt
Iron
Carbon
Sulfur
Copper
Zinc
Lead
Total Impurities
99.99
<0.00002
0.002
<0.01
0.0002
0.00005
0.00005
0.00002
<0.01
Diam
thickness
length
width
purity
Details
Foil
0.03mm -0.8mm
>3000mm
2mm-150mm
99.99%
Details
sheet
0.03mm-50mm
100mm
100mm
99.99%
Details
wire
0.025mm
-0.05mm
7000-8000m
99.99%
Details
Stab
2.0mm
-150mm
<1000mm
99.99%
Details
powder
50nm- 20μm
99.99%
Details
Pellets
6mm-13mm
99.99%
Details
granules
6mm-13mm
99.99%
Details
Sputter
target
3mm-300mm
O30--2000mm
99.99%
Details
crucible
30ml-50ml
99.9%
Details
mesh
0.05-2mm
hole:0.3X0.6mm, 0.5X1mm
............20X40mm
99.9%
Details
foam
0.3-10mm
100mm
100mm
Details
Tungsten contacts
In addition to the huge melting point, tungsten also has high electrical
and thermal conductivity. Conventional wires are not made of it only
because of the high cost of the product. But in specialized areas, it
has been successfully used to create transmitting bridges, contactors
and connectors. Tungsten contacts can have a different shape, depending
on the scope of its application. Its main feature is that with frequent
closing and opening of the circuit, its surface always remains clean
from oxides, which ensures uninterrupted operation of the system. Those
who want to buy tungsten contacts will find it useful to know that they
are usually sold as ready-made sets, individually, or in large batches
per kilogram.
Tungsten contact is possible due to the fact that on the basis of the
enterprise all products undergo a full production cycle, from production
at the field to molding and processing. This guarantees exceptional
quality. No scrap, no recycling or smelting. Only accurate chemical
composition and predictable physical properties.
Where is tungsten contact applied?
First of all, it is an element of an electric circuit that can operate
under heavy loads with overheating, not succumbing to reflow. This also
occurs due to the rapid cooling of the surface due to good
heat-conducting characteristics. It is mainly used for the manufacture
of the following products:
Switches and switches, including oil-filled explosion-proof
modifications.
Tips and other parts for creating electric arcs.
Switches of powerful appliances.
They can be used as small tires for heavy loads, as well as for creating
power relays.
All products from MetalKomplekt demonstrate full compliance with
technical specifications, compliance with domestic and foreign
standards.
.
| Tungsten | Cobalt | Iron | Carbon | Sulfur | Copper | Zinc | Lead | Total Impurities | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 99.99 | <0.00002 | 0.002 | <0.01 | 0.0002 | 0.00005 | 0.00005 | 0.00002 | <0.01 |
| Diam | thickness | length | width | purity | Details | ||
|---|---|---|---|---|---|---|---|
|
|
Foil | 0.03mm -0.8mm | >3000mm | 2mm-150mm | 99.99% | Details | |
|
|
sheet | 0.03mm-50mm | 100mm | 100mm | 99.99% | Details | |
|
|
wire | 0.025mm -0.05mm |
7000-8000m | 99.99% | Details | ||
|
|
Stab | 2.0mm -150mm |
<1000mm | 99.99% | Details | ||
|
|
powder | 50nm- 20μm | 99.99% | Details | |||
|
|
Pellets | 6mm-13mm | 99.99% | Details | |||
|
|
granules | 6mm-13mm | 99.99% | Details | |||
|
|
Sputter target |
3mm-300mm | O30--2000mm | 99.99% | Details | ||
|
|
crucible | 30ml-50ml | 99.9% | Details | |||
|
|
mesh | 0.05-2mm | hole:0.3X0.6mm, 0.5X1mm ............20X40mm |
99.9% | Details | ||
|
|
foam | 0.3-10mm | 100mm | 100mm | Details | ||