Zinc wire is used as an anode protective material for steel parts, in the automotive industry, mechanical engineering, in the manufacture of capacitors, in shipbuilding, in the construction of refrigeration units. Due to its chemical activity, this material successfully prevents the corrosion of less active metals, in particular iron.

Zinc wire is distinguished by diameter - from 1.5 to 3.2 mm - and by the brand of metal used - CV, Ts0, Ts1. The marking also indicates the class of dimensional accuracy.

Zinc wire is a type of rolled metal used as a consumable in the process of applying a zinc coating by spraying. It is made from primary zinc with the brand name C1. The chemical composition of zinc wire is strictly regulated by GOST 3640-79. Zinc wire is produced using the cold deformation method. The quality of this type of product is controlled by GOST 13073-77. The standard cross-sectional shape of the zinc wire is round. Its diameter ranges from 1.5-3.2 millimeters. According to the State Standard, there is a normal and increased accuracy in the manufacture of products of this kind. Zinc wire in diameters of 2.5 and 3.0 millimeters is performed with increased accuracy.

The surface of the manufactured zinc wire should be clean and non-oxidized, without any cracks and delamination. Traces of lubrication in small quantities are allowed. The surface of the zinc wire can, if necessary, be coated with a layer of special preservative grease.

Zinc wire is widely used as a deposition for anti-corrosion coatings, in the production of capacitors, in refrigeration units, mining, shipbuilding and mechanical engineering.



 

		Diam	thickness	length	width	purity	Details
	Foil		0.03mm -0.8mm	>3000mm	2mm-150mm	99.99%	Details
	sheet		0.03mm-50mm	100mm	100mm	99.99%	Details
	wire	0.025mm -0.05mm		7000-8000m		99.99%	Details
	Stab	2.0mm -150mm		<1000mm		99.99%	Details
	granules		6mm-13mm			99.99%	Details