Zinc is a brittle metal with a blue glow. It can be easily extracted because it occurs in concentrated ores. The use of zinc is very common throughout the industry. For example used as galvanic coating on steel against corrosion.

A rod is a solid material made of either pure metal or metal alloys. Bars are straight with a round cross section> 2mm.

Zinc rod anode made of 99% zinc
The zinc rod anode (diameter 8 mm, length 10 cm) is ideally compatible with our electroplating pen. You can easily replace the anode in the pin if it . With the zinc anodes for electroplating, it is possible to achieve an ideal zinc deposition when using zinc electrolytes. The zinc anodes act as sacrificial anodes and ensure constant zinc separation when galvanizing using tampon or pin plating. The zinc rod anodes fit exactly into the holding device of the Tifoo pin electroplating system and enable a quick exchange with other rod electrodes from our online shop (e.g. nickel rod anode, copper rod anode or graphite rod anode). So you can always use the most suitable anodes for the respective application situation.

2/5 / 10mm high purity Zn zinc rod anode electroplating solid round bar 300mm long

Specifications:
100% brand new and high quality.
Material: zinc
Diameter: 2mm / 5mm / 10mm
Length: 100mm / 300mm

Application:
Mainly used in die casting alloy, battery industry, printing and dyeing industry, pharmaceutical industry, rubber industry, chemical industry and so on.
Zinc and other metal alloys are widely used in electroplating, spraying and other industries..



 

		Diam	thickness	length	width	purity	Details
	Foil		0.03mm -0.8mm	>3000mm	2mm-150mm	99.99%	Details
	sheet		0.03mm-50mm	100mm	100mm	99.99%	Details
	wire	0.025mm -0.05mm		7000-8000m		99.99%	Details
	Stab	2.0mm -150mm		<1000mm		99.99%	Details
	granules		6mm-13mm			99.99%	Details